Introduction To
stainless steel coil 316l is a product which is acid and rust resistant. Besides, stainless steel coil 316l has good strength ability and good tensile ability. With the high temperature resistant and high presssure resistant advantages, stainless steel coil 316l is widely used in petroleum,architecture, project built, mechanical industry .etc. Our company has been manufacturing and trading stainless steel coil 316l for years of experience. with the huge stock ability and strong manufacturing capacity, we could provide you the quickest delivery. Moreover, we could provide stainless steel sheet, stainless steel pipe, stainless steel bar .etc.
Standard
ASTM.JIS,GB,DIN,SUS
Width
1000mm ,1219mm ,1250mm ,1500mm ,1600mm ,1800mm,2000mm ,2500mm etc.
Thickness
cold rolled,
0.3mm,0.4mm,0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.2mm,1.5mm,2.0mm, 2.5mm,3.0mm
Hot rolled,
3.0mm,4.0mm,5.0mm,6.0mm,8.0mm,10.0mm,12.0mm,14.0mm,16.0mm,18.0mm,2
0.0mm,22.0mm,25.0mm,28.0mm,30.0mm,32.0mm,35.0mm,38.0mm,40.0mm etc.
316L Chemical Composition
| C | Mo | Si | Mn | Cr | Ni | S | P |
| ≤0.03 | 2.0-3 | ≤1.0 | ≤2.00 | 16.0-18. | 10.0-14 | ≤0.03 | ≤0.035 |
316L Physical properties
| Tensile Strength ( Mpa ) | >520 |
| Elongation ( % ) | ≥40 |
| High Voltage | ≤ 200 |
Finish Introduction
| Surface | Definition | Application |
| 2B | Those finished, after cold rolling,by heat treatment,pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster | Medical equipment, Food industry, Construction material, Kitchen utensils |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No. 100 to No. 120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No. 150 to No. 180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
| NO. 1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe. |
Post time: Aug-03-2023
